Tractor Talk Discussion Board |
Re: Cub Cadet Parts
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by steve from mo on July 07, 1999 at 07:16:18 from (128.206.109.134):
In Reply to: Cub Cadet Parts posted by Bill on July 06, 1999 at 19:41:39:
Bill, If you can't get better information, like a part number, here is what I'd try: Take the old belt off, measure the width of the pulleys, and take the belt with your pulley measurement to NAPA or someplace that carries lots of belts. That way, you should get a belt that is close enough to work. Even if your old belt is broken take it along so you and the counterperson can guess at the proper length for a new belt. If the belt is completely missing, use a rope to get a good estimate of the length needed. Allow for some slack if that's how the clutch works. Routing should be relatively simple for a drive belt like that. You may need to buy more than one belt if you are still uncertain about length. Then return the wrong one once you get one installed. Steve
Follow Ups:
Post a Followup
|