Tractor Talk Discussion Board |
Re: 1957 Ford 650 running rough
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by B.C. on June 11, 1999 at 13:24:02 from (131.167.75.193):
In Reply to: 1957 Ford 650 running rough posted by bob on June 11, 1999 at 11:17:59:
Well you might as well replace the points, condenser and distributor cap, for all they cost. Then having made sure the points gap is right, check the timing with a light. Be sure the sediment bowel inlet is not plugged with rust from the tank. One of the worst case scenarios if all that doesn't make a difference is that your exhaust rocker arms are loose or way out of adjustment. Checking the valve lash would let you see whether or not that was the case. Good luck.
Follow Ups:
Post a Followup
|