Tractor Talk Discussion Board |
What kind of implement do I have?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by NC Wayne on August 20, 2005 at 20:17:28 from (205.188.117.6):
I've been cleaning out an old shed for a lady, mainly to get the 30' long 8" I beams used to build it for a shed of my own. As I cleared away over 10 years of briars and other growth I found several implements that she was nice enough to throw into the deal also. The 3 disc disc plow I know what is but I've got another item I'm not sure of. It's old enough that it has origional steel wheels, and by the name plate it was made by either Lakewood Construction Equipment Co. or Lakewood Engineering Co. (both names on the tag) out of Cleveland, Ohio. The equipment number looks like 31X2. It reminds me of a subsoiler but I've never seen one with as many shanks. This thing is roughly triangular in shape with a pull ring at the front going back to two wheels at the back spaced a little over 5 feet apart. The wheels both have levers to control the height of them inependantly to vary the depth of the shanks. There are five shanks total. Their in rows with 1 at the front, then about two feet back there are two about 2 feet apart, then another two feet back there are three more shanks spaced across about 4 feet. Dad grew up on a tobacco farm here in NC in the 50's and 60's and he said he'd never seen anything like it. If any of ya'll have any idea what this thing is please post and let me know what I've got. Whatever it's called I ought to be able to do some serious ground breaking with it behind our JD 440 crawler. Thanks for any input.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|