Tractor Talk Discussion Board |
Re: Chevy 250 Cid engine problem..
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Mike Burdick on July 24, 2005 at 12:39:11 from (67.4.47.39):
In Reply to: Re: Chevy 250 Cid engine problem.. posted by 1966ChevyC-10 on July 24, 2005 at 11:29:52:
My engine has an electronic ignition system and it looks fine. Good thought though. When the engine was running it sounded like something rubbing but couldn’t pinpoint the source. My first impression was that is was coming from the carburetor area. A couple of other facts: The oil indicator is a pressure type from the engine – not electric. Before I removed the pan I drained the oil. I ran a magnet thru it and found no metal or filings. When I removed the pan there wasn"t any broken pieces of metal in it. Took compression test and all cylinders were within specification and all readings were close to each other within a few psi. From the bottom the cylinder walls feel smooth (what I could see of them) and the engine has not used any oil. The truck is only used around the ranch so it has only 36,529 miles on it and the engine. Everything was in good working condition and I change the oil and filter on it every 2,000 miles plus or minus a few. I can understand something going wrong in the ignition system or the carburetion but with it combined with the oil pressure dropping – this has really got me baffled! Any and all help and suggestion are sure welcome.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|