|
Tractor Talk Discussion Board |
Broken Wheel Dish (Centers)
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rod F. on June 21, 2005 at 19:41:42 from (142.177.83.4):
Evening all, I've just broken the wheel dish (center) on my 7710. This has the older 8 bolt style flange wheels. This is actually the second one I've busted now. The other one broke about a year ago. These centers seem to have a few points of carbon to them, but they're not extremly hard. Certainly, to some degree a spring steel. With that said, I've had no luck welding them. I tried a 7018 on the first one, and now a Sodel 330 on the second center. The result was the same for both, with the center cracking again within 1 hour's service. These cracks were well beveled out, and welded from one side, but the new cracks seldom follow the old. New cracks seem to develop across the weld bead, at random. The original cracks radiate outwards from the wheel nuts.
I'm just curious if anyone out there has had experience with welding these centers, and if so, what kind of success you've had.
I have a new wheel on order. I'm just tring to get a few more days from this, as it may be Friday or more likely Monday before I can get the parts, and I need the tractor. Curiously awaiting your ideas....
Rod
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
