Tractor Talk Discussion Board |
Re: brush hog hook up to JD B
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by steve from mo on May 16, 1999 at 14:53:52:
In Reply to: brush hog hook up to JD B posted by Greg on May 16, 1999 at 14:45:24:
Greg, The John Deere B, at least the later ones, offered a standard 540 rpm pto hookup. The SAE standard should be available on this board somewhere, or you would find it in the manual for the tractor or the one for the mower. Measurements are specified for height and length at each relevant point in the hookup. To get this set up after you find the measurements, however, you may need to rotate the drawbar 180 degrees so the offset is up or down as required. You may need to adjust the mower hitch also. Unless the mower is a real odd one, you should be able to make it work. Start with the manuals, however.
Follow Ups:
Post a Followup
|