|
Tractor Talk Discussion Board |
attaching bush hog to 3 point hitch
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Andrew Krein on April 20, 1999 at 00:03:13:
I just purchased a 5 foot King Kutter bush hog to
use with a John Deere 755. I'm a bit of a novice
here and am having difficulty attaching the bush
hog to the 3 point hitch and PTO. I can get the
top arm and side pins connected ok, but then drive
shaft appears to be too short. It's about 12
inches away from the PTO when fully lowered and
about 2 inched away when fully raised.What am I
doing wrong? The only other thing that I've used
the 3 point hitch for is a pull behind snow blade
so there was no PTO connection. The King Kutter
manual is useless. What is the proper procedure
for connecting to the PTO and three point hitch. I'd appreciate any help. Thank you.
Follow Ups:
Post a Followup
|
