|
Tractor Talk Discussion Board |
Re: Liquid fertilizer rates - need some help
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hal on May 29, 2004 at 20:35:50 from (24.187.69.249):
In Reply to: Liquid fertilizer rates - need some help posted by ShepFL on May 29, 2004 at 16:43:09:
That seems like a pretty high rate for sidedress. If you were really running 36# alongside EACH 600' of row, and lets just assume the rows are spaced at 36" for now, you would be putting on about 900# of product per acre; if your rows are narrower you would be putting even more per acre. 900# of 20-0-20 product would be 180# of N and K per acre, very high!. Is this what they recommend on your soils in your area? Remember you said it has been dry, so very little N has been lost to leaching. If I were you I would apply it dry at whatever you determine the proper rate to be and then irrigate with .5" of water.
Are you using the sprayer because that is all you have? I assume the Bulldog is water soluble; you will have to know how many lbs you can disolve per gallon. I never used it but I believe commercial premixed liquid fertilizer runs a little under 11# per gallon.
If you are thinking about only mixing 1 oz with a gallon (which doesn't sound right) you will be there forever. You will have less than 2 pounds in your 25 gallon tank, and how far would you want the 2 pounds to go. Maybe you meant 2# disolved in a gallon; that would make more sense since now each gallon would weigh 10 lbs and you would have 50 lbs in your 25 gallon tank. But you would have to find out if the Bulldog will disolve 2# in a gallon without settling out.
If your soils are sandy and porous and you are using irrigation, you are better to make several split application of nitrogen just before applying the water. Also on sandy soil you should be doing smaller apps of water at more frequent intervals. I would think that 300-400 pounds of that stuff would be the most to apply at any one time. Good luck with your plants and the weather.
Follow Ups:
Home
| Forums
Today's Featured Article -
History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
