Tractor Talk Discussion Board |
Re: Convert a Cub to a Cub Lowboy
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Harold H on April 07, 1999 at 18:50:20:
In Reply to: Convert a Cub to a Cub Lowboy posted by ShaunWM on April 07, 1999 at 12:58:23:
Shaun, To convert your Cub to a Cub Lo-Boy you would have to find different front axle ends from a Lo-Boy in a salvage yard. The center tube is the same. All you have to do on the rear end is take the bolts out of the drop housings and rotate them forward. If you can't find the Lo-Boy front axle parts you could probably have a machine shop lower yours by shorting the standards about 6 inches each (just a guess on height, you would need to measure standards on a low boy and match length). You will also have to reposition the mower mounting to make the mower run level and this may entale getting a shorter mower drive belt. Basicly would be a very simple conversion. Harold H
Follow Ups:
Post a Followup
|