Tractor Talk Discussion Board |
Re: J.D. 1050
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Brokenwrench on April 12, 2004 at 15:15:23 from (152.163.253.66):
In Reply to: J.D. 1050 posted by Normo on April 12, 2004 at 14:29:36:
If that's all it is,you can pull the engine,have the crank turned put in undersize bearings and replace a rod if needed and gaskets and seals for about $850 if you do the work yourself.Check it out closely,I've had some with a bad injector that causes a similar knock. But since you really don't know what you will find,figure on $1500-$2000 in case the crank has to be welded up,block hot tanked and the oil pump replaced,and any other surprises you find.I have 2 in the shop now with spun bearings,750 with 1000 hrs,and a 950 with 1320 hrs.Both are sludged up from a combination of using the cheapest car oil wal-mart sells,(by the owners admission) and overheating.Both radiators are plugged with grass clippings.If you don't want to rebuild,you can find the Yanmar engines on e-bay for $1500 up for used and around $3500-4000 for new ones.
Follow Ups:
Home
| Forums
Today's Featured Article -
History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|