|
Tractor Talk Discussion Board |
Re: When to weld vs bolt
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Mark on January 28, 2004 at 05:41:03 from (199.46.199.230):
In Reply to: When to weld vs bolt posted by Ray on January 27, 2004 at 14:07:22:
During WWII Henry Kaiser built liberty ships in 4 days by welding the plates together rather than riveting (fancy bolt function with it's own built in torque....it cools down after installation..right!) As the story goes, more were splitting in half, pounding up and down in the N. Atlantic, than the Germans were sinking. The solution was a 3 foot strip of steel down the sides (forgot how long) that was riveted on (fancy bolt). This solved the problem. I bolt in heavy vibration and weld otherwise. Weld is quicker but I feel comfortable seeing the "steel clamp" that the bolt offers....................however, as of lately, I switched from my old favorite welding rods and welder and got a DC (vs AC only) stick welder and now almost exclusively use the 7018 stick. This combination puts out some mighty fine welds and have yet to have one fracture (they say on the box that the 7018 resists fracturing due to vibration. The other thing done (of late) is always scab a piece of metal over the joint to be welded (if welding 2 flat surfaces together...like a mower deck fracture) rather than butt joint. Haven't had a crack yet. I'm not a professional, I'm a 25 year hobby farmer self taught welding. I can do a pretty fair job. My 2 cents Mark
Follow Ups:
Home
| Forums
Today's Featured Article -
Identifying Tractor Smells - by Curtis Von Fange. We are continuing our series on learning to talk the language of our tractor. Since we can’t actually talk to our tractors, though some of the older sect of farmers might disagree, we use our five physical senses to observe and construe what our iron age friends are trying to tell us. We have already talked about some of the colors the unit might leave as clues to its well-being. Now we are going to use our noses to diagnose particular smells. ELECTRICAL SMELLS
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
