Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 
Marketplace
Classified Ads
Photo Ads
Tractor Parts
Salvage

Community
Discussion Forums
Project Journals
Your Stories
Events Calendar
Hauling Schedule

Galleries
Tractor Photos
Implement Photos
Vintage Photos
Help Identify
Parts & Pieces
Stuck & Troubled
Vintage Ads
Community Album
Photo Ad Archives

Research & Info
Articles
Tractor Registry
Tip of the Day
Safety Cartoons
Tractor Values
Serial Numbers
Tune-Up Guide
Paint Codes
List Prices
Production Nbrs
Tune-Up Specs
Torque Values
3-Point Specs
Glossary

Miscellaneous
Tractor Games
Just For Kids
Virtual Show
Museum Guide
Memorial Page
Feedback Form

Yesterday's Tractors Facebook Page

  
Tractor Talk Discussion Board

Re: DIESEL QUESTION


[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by T_Bone on October 12, 2003 at 01:10:11 from (65.58.140.147):

In Reply to: DIESEL QUESTION posted by Allen on October 11, 2003 at 11:26:35:

Hi Allen,

Lugging a diesel engine is where your running WOT without gaining RPM at peak torque design or at a higher RPM.

"Lugging can occur at any RPM."

If lugging happens below design peak torque very often, it will tear the bottom out of the engine (read as very expensive to repair).

Read the Cummins engine website for the above explanation as I have not found another website that explains it better.

Wet Stacking is where carbon deposits are formed under the valves and/or in the valve seats. This doesn't allow for the valve to seat correctly on each stroke. Wet stacking occurs at low RPM and multiplies rapidly when the engine is under a lite load.

Depending on the engine design, most fuel efficency starts at 180* and peaks at 200* plus.

My PSD, DI engine, does not like prolonged idleing. When in lo-range, empty, creeping the backcountry for several hours it will load the cylinders up and there is a distink engine power degrade. I then have to rap it up for a couple minutes and she blows black smoke something terrible. At peak torque pulling 16k GCW it does not smoke at all, well that you can see in the mirrors anyway. It's a diesel, it smokes!

I also have a IDI diesel that can idle for 24hrs straight with out any signs of having any problems and it has 7500hrs on it.

I use Type F, ATF mixed at 1qt/50gal #2D, for a in-engine injector cleaner. A time proven method of 50yrs plus.

Injectors out of engine then I use Berryman B-12.

You might also look for an fuel suction air leak. Take the fuel tank return line off into a clean bucket and if the fuel stream has air bubbles in it, you have a suction air leak somewhere. You can also use the fliter drain on some engines and run that into a bucket.

A suction leak can occur on the pressure side as well as the vacumm side but will not drip fuel.

Cover each fitting, one at a time, with a heavy oil while observing the fuel flow. If the bubbles stop, you found your suction leak.

T_Bone




Follow Ups:




Post A Followup

:
:

: Re: Re: DIESEL QUESTION

:

:

:

:

: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and ... [Read Article]

Latest Ad: Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor [More Ads]

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy