Tractor Talk Discussion Board |
Farmall F-30
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Michael on May 31, 2003 at 18:45:01 from (24.211.35.91):
I have a 1932 Farmall F-30. When I got the tractor it was not running and been setting for many years. I restored the tractor and rebuilt the engine. At first it ran ok but sounded like it had one heck of a cam. It would occasionaly spit and pop back thru the carb. and exhaust. It always acted as if it were running out of gas. I found I had a gas tank problem, so I reparied it. It kept doing the same. Then I replaced the carb with a fresh rebuilt one. Still the same thing. I then re-adjusted all the valves, still happening. I replaced the magneto with a new one. Problem unsolved. I checked the cam and it appears to be alright, and the maniflod is brand new as is the intake gasket. It runs smooth at first then it starts to pop and contiunaly gets worse till it eventualy cuts off. If I choke it,it picks back up again then it starts all over again. Anybody have any ideas? I've done it all I know and am fresh out, and have no idea on what to do or try next.
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|