Tractor Talk Discussion Board |
Re: power stroke problem
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by JD790 on April 13, 2003 at 23:08:40 from (12.82.142.160):
In Reply to: power stroke problem posted by easyguy on April 13, 2003 at 03:52:30:
Low Injection control Pressure can cause this. If it does it when it is hot or cold! If the engine has a Blown oring on a injector causing injection control pressure to drop below about 350 psi it will stall. Powerstrokes need about 800 psi to Start and Idle between about 400 to 550 psi injection control pressure. I would unplug the injection control pressure sensor and the IPR pressurereg Valve will go to a default 550 or so Idle pressure. This would indicate a possible bad IPR Valve. Could be a Cam Sensor but does not sound like it. That Engine in a Navistar Truck will Idle with the THrottle position sensor unplugged... I had Seen bulletins of Tourque converters (Allison) Causing this in rare cases. Not sure about Ford Trannys. You Can get real lost in the pocketbook Replacing parts to find the problem. Need to get codes and have system checked. The Orings on the Injectors were only part of the list of parts superceded 6 or 7 times till they got them right.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|