Tractor Talk Discussion Board |
Re: A front bucket for a 1959 841 work master ?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Truck on February 28, 2003 at 06:27:50 from (152.163.188.71):
In Reply to: A front bucket for a 1959 841 work master ? posted by Brad on February 28, 2003 at 03:13:56:
If you do not have power steering you might want to look into buying a rear scoop for the three point instead. I have a 640 with a nice large loader that was impossible to steer with any load. I am right now in the process of replacing the front axle support for the second time I know of on this tractor. I have seen loaders for hundred series Fords go for 300-1000 and there always seems to be one for sale somewhere. Make sure you get all the front attaching hardware and bracing, and the brackets for the rear axle attachments or you will need to do some serious fabricating. For light use( Not gravel pit loading use, they are fine.) Truck
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|