Tractor Talk Discussion Board |
JD 2140 brake problems
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ian on February 03, 2003 at 13:34:14 from (204.239.148.2):
The 2140 tractor we have been working on for two weeks now still has no oil flow to the master resevior on the master cyl. We had the master cyl rebuilt but get no oil flow from the tractor through the hole in the backing plate, we can blow thro the holes in the plate and with the tractor running we get oil thru the plate but it is the wrong hole and is blocked off when the master cyl is installed something must have come off inside the tractor. Or there is a port inside the plate that conects the 4 holes together. Has any one ever had this problem. All other hydrauics work well. Should we be thinking of modifying the plate or, what the heck is going on. It worked before we got a hole in a brake line, we replaced that. and we used to bleed the brakes and get lots of pressure. But there is no oil flow any more at the apropriate hole that lines up with the resivor hole in the master cylinder. Even the JD dealers are stumped???
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|