Tractor Talk Discussion Board |
Late Model Cub Generator
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John McGrath on June 25, 2002 at 19:08:25 from (66.82.48.1):
Just purchased a well restored 1964 Cub with neg ground 6 volt generator that has just been rebuilt. Cub has regulator and distributor ignition. The problem is the generator is not charging the 6 volt battery while running. There is the restored orginal amp meter which shows no charging anps while the engine is running nor does it show a discharge with the lights on. I asked the previous owner about this and he mentioned that the generator might have been "de polarized" and I need to "re polarize" the generator. The wiring harness appears to be the original with grounding wires attached to the lights. Anyboby out there with any suggestions before I start taking the thing apart??? Thanks for your help!!!! John McGrath
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|