Tractor Talk Discussion Board |
Re: 1944 john deere model steering trouble
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jerry S on June 17, 2002 at 10:40:00 from (63.71.59.98):
In Reply to: 1944 john deere model steering trouble posted by cam on June 16, 2002 at 21:42:52:
I haven't done this but there is a way to adjust these so the two gears come closer together but it might bind up when you turn the wheel toward the unworn part of the sector. I saw an article in the Green magazine about this issue a year or more ago. Ends up the guy took the gear off the pedestal shaft and had it machined back to original since there were no aftermarket ones made. If your steering wheel moves in and out, you likely need to get new bearings for that shaft. Easy to replace those. If your bearings are gone for the pedestal shaft, that is a whole new operation I wouldnt' care to tackle myself. I'd post on the JD board and give some detail about model you have and which parts are moving and which way.
Follow Ups:
Home
| Forums
Today's Featured Article -
Restoration Story: 1951 Farmall H - by The Red (John Fritz). I have been a collector of Farmall tractors since 1990 when I first obtained part of the family farm in Eastern Indiana. My current collection includes a 1938 F20, 1945 H, 1946 H, and the recently purchased 1951 H. This article will focus on what I encountered and what I did to bring the 1951 NEAR DEATH Farmall H back to life.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|