Tractor Talk Discussion Board |
Re: MF65 Opinions Experience
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by GEO on February 11, 1999 at 15:34:47:
In Reply to: MF65 Opinions Experience posted by Richard on February 11, 1999 at 08:04:14:
If you are refering to the o-rings on the tube that connects the pump to the lift quadrant, removing the top housing is not neccessary. The o-rings can be replace simply by removing the small plate on the front right side of quadrant. It is held down by just two bolts and tube can be lifted out, or it usually comes out with the plate. Just be careful when reinstalling and make sure you get it back in place on the pump. These o-rings won't keep the lift from operating even if they are blown. You may have to check the pump itself. GEO
Follow Ups:
Post a Followup
|