Tractor Talk Discussion Board |
Re: Re: Re: loader conversion to full hydraulics
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Gerald on February 02, 1999 at 08:30:56:
In Reply to: Re: Re: loader conversion to full hydraulics posted by Kevin on February 01, 1999 at 18:05:43:
Either cylinder or valve seals. Could be some of both. To make double acting you will be replacing both so will cure that. You should rebuild pivot pins if the hydraulics are that worn, the mechanics will also be badly worn or worse. Gerald
Follow Ups:
Post a Followup
|