Posted by warddog on November 02, 2023 at 09:38:27 from (216.183.203.13):
Just bought 80 acres that is partially reclaimed strip property. About half is now pasture with a pit and the rest is timber that still has some of the spill banks. We are building a home on it next spring. The entire 80 acres is barb wire fenced and from my walking the perimeter it appears the fence on the perimeter of the wooded section can't be accessed very easily with any type of machine to be able to work on the fence. I already have someone that will cut and bail the pasture grass and bought a 55 HP tractor to do what little brush hogging that is left. My question is what would be the best equipment for making the perimeter of the fence accessible to keep up with the fence? I doubt my tractor will serve the purpose even with the front-end loader and I have contemplated a small dozer or a tracked skid steer. This property has nothing on it, yet so we will be putting in everything from a driveway to electric, water and a septic system. We have found a local guy that does all this and has the equipment and I've also thought to just see if he will clear a path along my property perimeter so I can access it with my SxS to do fence work and access it easier to deer hunt. What are you folks thinking on this issue? I have thought that maybe I should have bought a tracked skid steer and do everything with that in lieu of the 55 HP tractor with the front-end loader. I hate to take this tractor into the woods as I got a pretty good deal on it via an auction as it is a 2018 Kioti with 30 ACTUAL hours on it as the guy bought it from the local dealer with a tiller just to do his garden.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Niagra View Mobile - Powered by a 1959 Ford Tractor - by Mark Massey. In 1959 the Niagara Frontier Transit Inc. of Buffalo, New York designed and built six Viewmobiles for the Niagara Frontier Sightseeing Inc. for use as a sightseeing ride at the Niagara Falls State Park, Niagara Falls, New York, powered by a 1959 Ford 611 Tractor.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
