Someone had the same question not too long ago - see this thread. Some pretty good ideas/responses there. Here's my response there, re-posted:
Keep the Oliver 18's in mind. I have an All-Crop 90 and two 66's, but have also used a friend's Oliver. The Oliver has a narrower cut width than the All-Crop 90, but probably gets about the same number of acres per hour because it seems to feed a little smoother and run with a touch higher ground speed. Whatever you get, look for one without canvases (if an all-crop, look for a 72 or 90). Also check the bottoms of all hoppers/chutes for rust. The canvas/draper style are nice for gentle handling of some clover crops, but for grains they're just a pain.
Nothing wrong with the All Crops if in good condition. One of the issues with the all-crops is the rubber concaves: They're fantastic if they're still in decent shape, but at this point they're all old enough that many are worn out and the fixed rubber insert is beat to heck or missing. If that's the case, they won't thresh worth a dang until they're fixed, and the rubber inserts are getting a little harder to get. The simple steel concaves of the other brands might be a little harder on fragile clover/grass seed, but there's a better chance they'll be in usable condition.
I'd look for one with a scour-kleen. They do an amazing job of cleaning out the fines. You can still get new screens for scour-kleens, and your end product will be a higher grade. Really useful for us as we don't spray our grain for the cattle and one of our grain bins doesn't have an aeration floor. The green weed seed that you'll get in the product without a scour kleen can really cause some issue with heat/mold. With it cleaned out from the scour kleen, it's a much better product to put in the bin.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: 1951 Farmall H - by The Red (John Fritz). I have been a collector of Farmall tractors since 1990 when I first obtained part of the family farm in Eastern Indiana. My current collection includes a 1938 F20, 1945 H, 1946 H, and the recently purchased 1951 H. This article will focus on what I encountered and what I did to bring the 1951 NEAR DEATH Farmall H back to life.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
