Posted by RyanKve on March 15, 2023 at 07:53:31 from (174.216.147.208):
Hello all, Recently I purchased a Farmall 450 diesel. After slight repair I was able to get it running on gas and diesel excellently. The tractor makes gobs over power, however it is having issues with the clutch and T/A. In fifth gear it slips and wont move with the t/a forwards. However if I pull it back it will grind but if I push in the clutch it will stop grinding and move. Mid throttle it will do fine but if I rev it up the clutch will start slipping. You can feel it lightly grab again when throttled down. Going up a hill is impossible in fifth gear. 4th gear will slip only if starting on a big hill. The tractor will not get moving if ta is forwards.
All of this is after I tried playing with the linkage. Here is what I did. I started by disconnecting springs and rods that went between clutch and t/a. Adjusted clutch freeplay to about 3/4 inch. From there with the t/a handle forwards, I twisted the shaft going into the t/a housing gently counter clock wise until it stopped. The linkage didnt have enough threads in order to the the 3/16 gap in the buckle. My guess is it maybe had double that. I then adjusted the linkage between the clutch and t/a to the shortest possible length. It does leak a little oil out from the bottom of the clutch. Im new to the t/a but not the clutches. Ive split 2 Hs and a 2404 for clutch work. Im not afraid to split it but wondering it anyone has suggestion first. Thanks, Ryan
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
