Posted by Billsboy on January 30, 2023 at 14:41:57 from (174.202.101.165):
Looking for a complete wiring diagram. The tractor is a 1944 Farmall B. It is 6 volt positive ground. The generator is a three brush but has a voltage regulator mounted on it. It has a magnito. So the charging system is for lights and starting only.
I am finding complete diagrams for it with a cutout. But nothing showing how the lights should be wired with a voltage regulator. This is an original light switch. It seems like the jumper from the ammeter should be removed with a voltage regulator.
This is my aging Dad's tractor. He got it in a terrible stuck condition. Rebuilt it years ago and the charging system has never worked since....but now he wants it fixed.
I know the ammeter works. The generator was rebuilt with a new regulator at that time. The generator passes a motor test. I have wired it 2 different ways that I have found unsuccessfully. Both with the L terminal connected and not. Not sure if the Voltage Regulator is good or not. I have attempted to polarize the generator. But found differing opinions on how to do so.
Sorry for the long winded explanation. But I have had enough googling to try and find my answer. Billsboy
This post was edited by Billsboy on 01/30/2023 at 03:14 pm.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.