Posted by T.R.K. on December 10, 2022 at 18:57:51 from (71.29.15.142):
The Hercules engine is in a Minneapolis Moline BG.
Please don't tell me to ask on the MM forum. All I get from them is Its not a 'real' Minneapolis-Moline.
I am having an oil pressure problem. I rebuilt the engine last winter. reground crank, new main , cam and rod bearings. new sleeves, pistons, even new valve seats and guides. Ok. The problem. When cold it pegs the 80 psi gauge. (Tractor Supply or Napa gauge, by the way.) But when it warms up, the oil pressure drops to near zero at idle. Less than 10. Maybe 5 psi.
I have already installed a shim in the relief valve, and cranked it down about as far as I think I can and it did help some. Before that the gauge would fall all the way to zero.
A couple thoughts: I should have miked the crank or checked the bearing clearance before assembling it. (I may have done this, but almost a year later, I really don't recall.)
I wonder if the machine shop removed any plugs from the oil gallery and I missed them.
I also wonder if there is supposed to be a restriction in the oil line to the governor assembly, the oil line runs external around the block to the governor. I replaced all the external tubing when I rebuilt it.
I wonder the same about the oil filter. Is there supposed to be some restriction in the oil line to the canister. It is mounted beside the air filter.
I also wonder if I just plain have a worn out oil pump.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Day Mom Drove the 8N - by Brian Browning. My Dad was wanting to put in a garden but couldn't operate the 8N and handle the old horse drawn plow he had found and rigged up to use with the tractor. Well, he decided to go get Mom out of the house and have her drive the tractor while he walked behind the plow. You got to understand that while my Mom is a hard worker who will always help whenever she can... she had never operated farm machinery before that day. Dad got her out there, explained how the clutch was the same as in our o
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.