Re: Farmall A magneto issues 2

Posted by 560Dennis on October 02, 2022 at 15:18:10 from (71.72.187.41):

In Reply to: Farmall A magneto issues 2 posted by bdoss2006 on October 02, 2022 at 14:52:59:

That should fire up . You got something else wrong .

Timing ,make sure you got number one tdc ,take valve cover off if you have to.

Make sure magneto is at number rotor one postion at tdc .

Compression

No vacuum leaks anywhere

Squirt some oil into cylinders (2 cycle ) 30 wt. to bring compression up .

Shoot some starting fluid down the air filter tube intake .

Fresh gas in carburetor.

Spark to all cylinders

Sand paper clean spark electrode

Clean rotor with fine sandpaper

Clean distributor cap contacts

It will start

Replies:

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: (avoid special characters) Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video Embed: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks. No political comments, hate speech or bigotry of any kind will be tolerated. Violations will be removed and posting privileges may be permanently revoked without notice.   Advanced Posting Tools   Select Gallery Photo  Attach Serial No List  Return to Post  Upload Photos/Videos Choose Files from your local computer Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]