Re: Farmall c knocking?

Posted by Zsprankle on September 04, 2022 at 18:42:28 from (71.60.32.187):

In Reply to: Farmall c knocking? posted by Zsprankle on September 02, 2022 at 18:26:35:

Thanks guys, I've considered all of your replies, truth is, I don't idle it down like that normally but it does make this noise when I shut it down, because I'm familiar with engines it drives me nuts, can't be valve train noise, I adjusted the valves roughly 100 hours ago and there was nothing like that before, plus when you put your ear up to it the sound comes from the bottom end, hydraulics don't make a difference and putting the engine under load makes the noise go away( I think it may possibly be still there but not as loud). When I rolled the bearings in I had my machinist dad measure the crank at the rod journals, (as you can't get to the main journals accurately with the crank in) and the measured within spec( don't remember as it has been a while) but all the journals plastigauged just fine, and I will have to try removing one plug wire at a time but I know the noise does come from all 4, thanks for all the input, I was thinking really seriously abojt tearing it back down this winter but an not thinking so hard about it

Replies:

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: (avoid special characters) Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video Embed: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks. No political comments, hate speech or bigotry of any kind will be tolerated. Violations will be removed and posting privileges may be permanently revoked without notice.   Advanced Posting Tools   Select Gallery Photo  Attach Serial No List  Return to Post  Upload Photos/Videos Choose Files from your local computer Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]