Posted by BarkMulcher on August 16, 2022 at 20:18:04 from (76.179.18.232):
Hey everyone. I am new to tractors entirely, aside from a few projects my dad had when I was a boy.
I bought a small plot of land this year and after hauling the first six felled trees using my hi-lift Jack as a winch, I decided I needed something more substantial to do the work for me.
So I now have a Case 222. Right off the bat it needed both the hydraulic lines to/from the lift cylinder - the elbow was bent and cracked on one, and the rubber had deteriorated on the other. The fella I bought it from said it'd been sitting untouched in a barn for fifteen years. Surprisingly it starts right up - I drove it around the guy's dooryard a few times. How about that.
I assume it'd benefit from a full flush and fill of engine oil and hydraulic oil. I read on another thread that 10W30 is recommended for my climes. What engine oil do you recommend? Anything else I should do or keep an eye out for?
How hard is it to find the hydraulic PTO assembly for these? If I understand the experts here, most of the available implements are driven by hydraulic flow.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.