Posted by showcrop on May 24, 2022 at 03:49:13 from (75.68.37.174):
In Reply to: Water Line Size posted by Danny Prosser on May 23, 2022 at 12:37:29:
Quoting Removed, click Modern View to see
Mark, I expect that the difference is most likely due to the flow value. We fire service pump operators are required to understand the relationship between flow rate and friction loss. I used friction loss tables of Hunter Industries, they are an irrigation supply company. I agree that it is strange that so many think that flow of a liquid is limited by any small diameter part of the over-all installation.The situation is simply that friction loss, which is what reduces the flow, is a function of distance. If the length is insignificant with respect to the whole installation so will the pressure drop be insignificant. Liquids are flexible. The flow will bend around corners. It will flow just a little faster through a restriction and then speed right up again. If it is necessary to have a larger diam. pipe than the calculations call for why not two inch? why not four inch? Why not twelve inch? It will be expensive to go back and replace the four inch pipe with twelve inch.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.