Posted by Billy NY on February 20, 2022 at 08:03:56 from (74.70.92.92):
In Reply to: Rust Removal? posted by 1370rod on February 19, 2022 at 05:45:54:
I never realized that depending on the soil conditions, that coating the moldboards to protect them can be very important, as the soils here are abrasive enough to scour them year to year or many years. When considering the finer kinds of soils, clay/gumbo and similar, sure made sense as the plow will pull with less resistance and not build up soil because of the polishing of the steel. We do have some areas with those kinds of soils actually. None of the farmers would coat the moldboards that I have seen.
In my experience with moldboard plowing, I was able to get a barn kept, 101 Ford plow that was mirror like polished. I rebuilt it, shares, shins, landsides, leaving the OEM Ford scripted moldboards. It does live outside, so the first year or so I coated with grease. In the weather conditions we have here, I was not all that impressed, but the grease certainly protected them, but it wears off after a year, not all of it, better than nothing too!
I'm also fussy with hand tools, especially my compost fork, I never let the tines get rusty or leave any tools like this outside, they reside in a dry basement that is heated during the winter.
I coat them with Rustoleum white paint, it lasts for years, will show the smallest spec of rust and for the money, it works great. There is a coating specific to this purpose, I never found it locally, so just decided that painting them was effective and no worries about it failing anytime soon.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Smells - by Curtis Von Fange. We are continuing our series on learning to talk the language of our tractor. Since we can’t actually talk to our tractors, though some of the older sect of farmers might disagree, we use our five physical senses to observe and construe what our iron age friends are trying to tell us. We have already talked about some of the colors the unit might leave as clues to its well-being. Now we are going to use our noses to diagnose particular smells. ELECTRICAL SMELLS
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.