Posted by crsutton81 on November 02, 2021 at 18:14:45 from (166.182.85.92):
I found this on the 'net and it jives with what I remember my Case IH dealer telling me. It's from a 1984 IH buyers guide. Model 2200 fits a 454,464,474,574,484,& a 584 utility. It's considered regular duty rating. Model 2250 is a medium duty loader for 40 to 80 hp tractors. Mills IH used to commonly put these on 574 and 674 tractors. Model 2350 for tractors with at least 65 hp and has a 12 ft dump height. Model 2450 is designed for the 86 series tractors and has a 16 ft dump height. Model 2355 is for 3088,3288,3488,3688,5088,5288 2wd tractors and has a 12.3 ft dump height. Considered regular duty loader. Model 2455 high strength loader for 3088,3288,3488,3688,5088,and 5288 2wd tractors with a 15.7 ft dump height.
All tractors and loaders are IH numbers. Hope this helps.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
