Posted by Doug - Iowa on March 17, 2021 at 09:54:48 from (216.248.81.129):
In Reply to: Shortages posted by vicinalvictor on March 17, 2021 at 08:39:02:
Here's the report from central Iowa. Stocked maintenance items (valves, brackets, covers, wire, etc.) last year are now 4-6 weeks delivery. 4x8 14 gauge sheet CRS steel 3-5 weeks if they can find it. Building metal has had three price increases since January but lead time is normal 1 week. I don't buy a lot of aluminum, but common shapes of 6061T6 seems stable in price and delivery. My metals supplier said he can get titanium easier than common gauges of cold rolled steel. I'm told the coasts are not near as supply-limited as the midwest, if you can afford the shipping on top of the price increase.
One ripple affect example is like this. We have 20 parts to run but the sheet can make 50. Last year we'd run all 50 and put the extra in stock as the cost of the metal was small compared to setting up the machine a second time. This year I can't get enough sheet, so we run the 20 and change setup to start the next order on the rest of that sheet. Next week we get an order for another 20 of the first part, but it has to get in line as we have no stock to pull from. Our normal 1 week lead time just went to 4 weeks just by limiting parts to stock.
If any of you guys want a job managing production control, we're hiring! Better start drinking heavily now, so you'll be in condition for what you're in for!
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
