Posted by Al Baker(pumpman) on January 04, 2021 at 18:10:07 from (199.192.180.1):
In Reply to: size of discbine posted by indianabuckman on January 04, 2021 at 15:38:12:
It all depends on what you are cutting. If you cut dairy quality alfalfa that is knee high when cutting it takes very little power. If you cut neck high mix of legumes and grasses for beef or horses, it will eat a 100 HP tractor alive. My JD discbine is considered 10.5 ft. So it is safe to call it a 10 footer. If I use 110 HP I can sail at the speed you could run, but drop down to 90/95 HP 4020 now you are at walking speed if it gets heavy. I have two 4020s One will handle it in heavy hay in 5th, Powershift one will not loose power, but will get hot if it is 80Degrees or more. I can cut with my 2950A little faster than you can run, but it also will get hot after 30 min or so. Hp requirements are dependent on the lay of the land, and how heavy your hay is. Will a 856 handle one, heck yes. Maybe not as fast as my 1086, but it will do a fine job, just a gear or two slower. Al
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
