Posted by RLP in Co. on December 22, 2020 at 17:00:57 from (174.212.238.116):
I set the points at .017 and the saw starts good and no kickback. Not sure what they were at before, I forgot to check. I spent 4 hours trying to get the oiler system working but gave up. I think whoever designed this saw tried every way possible to make it hard to fix! I'll just have to use a squirt oil can. I cut an arm off of the sharpening stone lever so I could use what's left of the stone. I should be able to get a few more sharpenings out of it. Thanks to the advisers on the points. I had it backwards. The good part of this saw is that it's light to carry but it has excellent power. When that chisel chain is sharp, it will cut almost as good as a bigger saw with the regular teeth. And after a few hours of cutting the other guys saw would be starting to get dull but with the power sharp I could touch up the chain and be out cutting a bigger saw. I wish they hadn't stopped making parts for this one. Is there a way to cut a flat stone in a circle and glue it onto the arm? It's about half of a 2 inch circle and a half inch thick both ways.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
