Posted by frysinger on September 08, 2020 at 10:40:52 from (134.126.76.185):
A couple weeks ago I couldn't resist a '41 9n for sale at a good price down the road. It started and ran at all engine speeds, but surged (especially under driving loads) and popped a bit. I bought it expecting to have to replace the governor, which I did. But while that helped, it still surges a bit. I read a thread here from early 2018 about this and tried all of the adjustments to the carb (which is a new TSX-241B the previous owner put on). It definitely acts and sounds lean, but I can't enrich the idle or main screws any more than I have. I checked the fuel screen into the carb (which seems quite a bit shorter than others I've seen), and secured the elbow joint (which seemed a little loose) to make sure no air was getting around it. I don't know how to check for a vacuum leak, but that's about all I can think of. Any tips on how to do that? Also, I saw somewhere (one person) that aftermarket carbs sometimes ship with an oversized jet that can let air in from about the bowl. Is that real?
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.