Posted by unc on June 24, 2020 at 10:12:28 from (23.190.128.58):
In Reply to: Here’s one for yuh posted by svcummins on June 23, 2020 at 23:14:32:
I was starting to work when Canada changed to metric. We grew up in feet and gallons, but science classes in school were usually in metric. There was a big push in the machine trade to convert over, but we usually ended up converting the dimensions on the drawings back to Imperial. At the same time,we bought our gas in litres, and got used to 20*C being a nice day. Like most of my generation, I pick and choose systems. I like my steel in 4X8 sheets, and my wood in 2X4s. It doesn't bother me to buy 20 litres of gas, but I still say I need a gallon of paint. For weather, Celsius temperatures are okay, but my metal and heat treating temperatures are firmly entrenched in Fahrenheit.
I worked for a forging manufacturer in the nineties- most drawings were in Imperial, but we did a lot of work to metric specs. We had a few stubborn workers who fought the metric system, but a younger work force who had grown up in metric. As you might guess, there was considerable potential for screwups on a massive scale- and there were. It took new ownership to finally lay down the law- you worked in the system required by the customer.
Our leaders at the time of conversion pushed too hard. They did not consult with business people, or those that actually were affected by the change- they just rammed it through, full speed ahead. The change must be gradual, and people are more accepting if they are convinced of the need for the change.
That's my ramble for this morning. I'm pretty happy on my five acres, but I've got an appointment this morning, and it's 20 KM away. unc
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
