Posted by DoubleO7 on June 09, 2020 at 11:32:09 from (104.136.208.51):
In Reply to: car ports posted by ratface on June 09, 2020 at 09:14:59:
Yes, spend the extra $100 for 12 ga, but note that is for the support tubes.I
I would also upgrade from 29ga panels to 26ga panels.
If the 12 foot width is half the width of your slab, think seriously about going to the full width.
Also COMPARE PRICES between dealers as well as brands such as Carolina Carports.
Some of these carport companies set their dealers up with exclusive territories. That allows the local dealer to set the price to suit his bottom line, not hours.
I have bought two and neighbor next door bought six, each one from a different dealer. And each one was a different cost per sq ft.
All were installed by the same south of the border crew in about four hours each.
All were by Caroline Carport.
Also, if your shopping for the cheaper style, i.e. Bent supports with the panels running lengthwise, compare the value of the sides to what the price would be if you added them yourself.
Putting those on are easy to do for two people from the ground.
You can get the metal from your local pole barn metal supply.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.