Posted by newhollandnut on June 03, 2020 at 20:49:27 from (216.21.217.11):
I know this isn’t really tractor or classic related but I thought I would check the brain trust on here. I have a 1997 1780 12/23 conservation till and this week is has started going a little nuts. Some times when I turn on the end row and start to put the planter in the ground it starts to fold up on me and I have to stop switch to transport mode and unfold the planter to get the lock hooks to catch on the sliding frame. I have tightened the hook adjustment rod as tight as it will go and it is still doing it. Tonight it was only doing it on the north end of the field and with turning and trying to find my marker and get the planter back in the ground I can’t see what exactly is going on for sure and it doesn’t do it every time and seems to be worse right after I’ve unfolded and began planting. After a while it will stop trying to fold. It only does it as I drop the planter back into the ground. Everything seems to be working fine it folds and unfolds as normal I’m just getting 8-10 unexpected fold ups per field. Does anyone have any experience with this?
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
