Ok, so heres what I've found out. I studied the net and went back into work today (shock) to try some things. I should point out, I am not just converting 5 wire to 4 wire for trailer towing. I was trying to convert the truck also. Since someone had at one time removed the 6 back lights ( 2-tails, 2-brakes, 2- B.U.) and added what I call Jeep style with the shared brake and turns. They had used a jumper to make brake lights and caused back feed which resulted in one brake light. So I figured Id put in the converter and keep the lights and go on to my trailer plug. Not so fast. My research led me to a cycle forum which yielded that these converters need lights connected ahead of them. Somehow they use the ground through the opposite brake bulb to flash (dont ask me). My test light was enough ground without even lighting. So, today I mocked in separate turn, brake and tails on the truck like it would have originally and tied into those with my converter. THen I hooked 4 wire lights with common brake/turn to the four wire end of the converter as if a trailer was connected Voila, brake, tails and turns! on truck and "trailer". But!! no brake lights through to trailer! Please note: during all this everything out front is working properly, running lights, turn signals, head lights. GRRRR! so now I am home stewing. The converter is supposed to be plug and play. Several cars have them from factory for towing. This is not new science but is blowing my tired mind.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
