Posted by modirt on May 08, 2020 at 05:16:08 from (199.187.163.74):
In Reply to: Deweze Hay Monster posted by modirt on May 06, 2020 at 07:55:36:
Quoting Removed, click Modern View to see
Part of the reason for me hunting one of these down was for the nostalgia of it, but also the economics.
I am putting up small square bales for the horse market. Have about 10 customers......largest only takes 150 to 200 bales. Smallest to date was a guy who only wanted 10 bales to feed some goats. But they all want good quality, small squares and will pay from $5 per bale on the low end to as much as $10 for a 50# bale of good timothy. Regardless of what it is, you have to get it off the ground and in the barn on a timely basis......as in within hours. Screw that up and you got nothing but moldy garden mulch. So critical it gets picked up ASAP.
Finding labor at any scale.....when picking off the ground.....is a problem. Here and everywhere else. Some pay by the hour.....I've heard $12 to $15. I pay by the bale.......labor gets 60 cents a bale. If that is 4 guys......they get 15 cents a bale, but if they can only do 75 to 100 bales an hour, they only get $12 to $15 per hour. They can get that elsewhere doing a fraction of the work, so not interested.
But with this machine.......two kids riding on the back....with me driving......can do 150 bales an hour. For the two kids.....that translates to $45 per hour......or even $30 if they split it with me. At $45 per hour......they will show up anytime I call and be happy to do so.
Could I do better with a NH stackliner? I could get it off the ground......but my storage barn isn't tall enough to tip it up to unload. I can get better prices if I deliver and stack in customer's barns. Video shows one such situation. Small elevated loft over box stalls in a small stable. I can't put them in that loft with a stackliner.
Economics also goes much deeper.....and it all factors into which method of hauling works best for me.
Bottom line is I was thrilled to find me a working hay monster!
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
