Years back when we USE to get hammered with snow i kicked the idea around of a ft. mount blower on a pick up like a double auger 8 footer . Like others have said WEIGHT , now off hand i forget what the 8 foot snowlander i was looking at weighed , but it was going to take some mod.'s to the ft end of a heavy 3/4 ton with a Dana 60 ft axle and that is rated for 4500 Lbs . Power wise i kicked around several options , One was a skid mounted V 8 thru a drop box and a drive shaft with carried bearings , thern i thought about the skid mounted power plant and hyd. pump and a hyd motor on the blower and was leaning that way heavily as i found a BIG pump that had lots of flow and a huge Hyd Motor that ran at 650 RPM and in terms of Hp was at 150 . I was swinging that way till GLOBAL hit and the big snow machine stopped making big snows and everything i was doing the plow handled nicely . There use to be a compqany that made ft. mount blower Pkgs that ran off the rear PTO with a gear box and drive shaft that ran under the tractor , but it has been many years since i stayed up on what was out there . Now with what snow we get now 99.9 % of the time my little OLD 724 walk behind does all i need WHEN IT RUNS.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
