Hyd Cyl. Rod Seal Installation tool--make one easy

Posted by Don on January 12, 2002 at 14:23:54 from (208.16.93.162):

Had a post few days ago looking for a install tool. Thanks to the gentleman who directed me to a supplier. But time being a factor I came up with an easy to make device that worked great. Makes up out of 3 1/4 bolts and a strap hinge. Remove hinge pin and replace with bolt extending about 3 inches longer than original pin. Weld matching bolts about 1/2 inch on both sided of center bolt. I cut off thread part to make smooth. Tool work just like the 30 to 50 dollar store bought unit. Place seal in end of bolt in a fashion that when you move hinge in other direction it simple puts a big U shape to inside of seal---reducing it in Dia so it slips right down bore as slick as a whistle.

Follow Ups:

• Re: Hyd Cyl. Rod Seal Installation tool--make one easy JDHUMP 16:59:55 01/18/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Hyd Cyl. Rod Seal Installation tool--make one easy Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]