Posted by Leroy on July 24, 2019 at 06:29:23 from (96.45.243.241):
In Reply to: It's green posted by Grandpa love on July 24, 2019 at 06:04:15:
Before live PTO that were very popular but with the live pto became less and less as people thought one less engine to maintain and baler would do as much. That is false tho as with the engine you have infinate speeds by adjusting tractor throttle. to match the verrying amounts in field you are baling, PTO you have to pick gear for heaviest spots and stay in that if you get to thin spot and could traver faster. I don't know what engine it has but might not be factory engine. You have some tractors without live power and that baler would work good behind them with the engine. And other than New Holland the Deere would be best to get parts for if it is a twine baler. Wire you could not give one away here in Ohio of any make. That is only baler you have talked about that I would give a second thought to. Smaller capacity but you would not be trying to push a thousand bales a day through it. The N Fords would handle it without problems. I believe it might be a 14T that was Deeres first twine tie baler in 55, the wire version came in 56. And you can find the parts list on line under Deeres parts lookup site. I don't think you could go wrong with it if it is the twine version even tho scrap is now down to $110 a ton as that baler would weigh about a ton and a half. And if turns out to be no good it would be a good learning experiance for you. When that baler was new Sad went with the NH 66 with the engine as he liked it better but both in same class.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
