Re: IH 1456

Posted by The tractor vet on December 20, 2018 at 19:18:02 from (104.179.81.68):

In Reply to: IH 1456 posted by nknebel on December 20, 2018 at 11:19:48:

Like everyone said add more . Now i work on I H tractors and have been doing so for over thirty years . When i have had the tractors split for usually a T/A i have always installed that O/Ring an well did it always fix the problem NO plus the fact that if you have never split a large frame I H you would see first hand that really there is no way they will suck air as tight as that gskt seals . Now what you may find is a crack on the pick up tube where the holding bracket is welded to the tube . So to have a look see ya need to pull the rock shaft housing to gain access . But the over fill of five extra gallons will cover the pick up tube as long as the tractor is setting level or with the nose in the air a bit , nose down and the oil level may drop enough that the tube top side is exposed . I am sure that you replaced the MCV pump while you were tryen to fix this . If not stuff a new pump on it and always keep a good filter in it , rule of thumb is change the hyd filter with each engine oil change . Condensation will build during weather and temp changes and the filter will try and clean out the moisture , once it is plugged then the bypass valve opens and in warm weather it will suck on thru and give you milky looking oil , so we all know that it won't get any better till you change out all the hyd fluid and filter , now if you are thinking this is the total cure all , Nope as you still have contaminated oil that did not drain out just by pulling the plugs and letting it dri dry , nope ain't ah going to happen To get it really cleaned up it will take a few more filter changes and the idea of ok i put two filters in i am good to go, Nope may take several more . Then you let the tractor set for and extended time frame and your back to square one . The starting and run for a few min. and not getting everything up to operating temp will not COOK the moisture out it just mixes it back into the oil . If your going to let it set like from fl to late spring you will be amassed at how much condensation build up you will have . I do this with mine when they set , before start up coming out of winter sleep before i park my donkey in the seat i take my breaker bar and the 3/8th and 1/2 inch drain plug sockets down under and crack ALL the drain plugs and let them DRIP . One year when we had fluctuating air temps all winter long with the tractor setting up on the barn floor of a old wooden bank barn i drained about SIX gallon of water out of all the drain plugs . Now how bad would six gallon of water mess up 18 gallons of HY tran and how fast would that plug the filter.

Replies:

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video Embed: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks. No political comments, hate speech or bigotry of any kind will be tolerated. Violations will be removed and posting privileges may be permanently revoked without notice.   Advanced Posting Tools   Select Gallery Photo  Attach Serial No List  Return to Post  Upload Photos/Videos Choose Files from your local computer Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]