[quote="Bob"](quoted from post at 22:44:22 11/01/18) Quoting Removed, click Modern View to see
Totally agree. I too have wondered what all these Frequent Warranty Flyers are doing wrong that they are buggering up so many tools?
Obviously, nobody HERE does this, but my suspicion is that vast majority of all these Craftsman "failures" a guy hears about are due to using too small of a drive size. I see it all the time on videos on YouTube, guys attaching a 36-inch breaker bar and trying to dislodge a 1-1/4 inch bolt with a half inch drive. And if it doesn't work, they attach a 5-foot pipe! Stick a crowbar in your wallet and buy the RIGHT sized tools ya bunch of generic mechanics.
I bet 95% of socket and socket wrench failures are due to consistently using too small of a drive.
My rule of thumb has always been what I was taught. If the hardware is bound up and won't easily come loose, switch to the biggest drive size that will fit. So if you're using a 1/2 inch and you're flexing the breaker bar 3 inches, you're using the wrong dang tool. Switch to the 3/4 or 1 inch drive and you'll spend a lot less time looking for replacements.
BTW I've got Craftsman drives/sockets, I've got an S-K set from the 1970s that's never had a single piece replaced, and I've got the Taiwan set my dad gave me 40 years ago. They all work still.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
