Posted by Will Herring on October 25, 2018 at 20:16:10 from (50.106.222.138):
Was going to post this last night but I was too tired to get the pictures and vudei uploaded, lol. So I've had this tractor since like 1996 or so, but I've never plowed with it for more than like 30 minutes or an hour.
So yeah, first time I've even had the plow on in 2 years. I must have done a poor job of cleaning and greasing it.
Took some video of the occasion, as well. Plowing in 2nd gear, WOT. Video Link --> [URL]https://youtu.be/WmttfJdss8U[/URL]
I may not have the plow adjusted quite right. I had to clean the plow for the first hour or two every pass with a shovel, and even at the end of five hours of plowing I still never got the trash boards really cleaned up (they wanted to cling the brown clay really well).
This is the most scoured up I've ever seen the plow, but I feel like I have many hours more of plowing to go before it's really where it should be. Before and after pics.
BONUS:
My actual motivation is because I stopped by a plow day near the Winchester IL river bottoms on 10/20. Here's a couple pics:
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
