Posted by Crazy Horse on June 19, 2018 at 07:49:53 from (206.75.54.142):
In Reply to: Looks handy posted by Pete black on June 19, 2018 at 07:35:10:
Looks interesting. The info below is from their website. Nice to see something made in the USA ...... but a guy wonders (like for North American built automobiles and trucks), where do the parts come from? Most parts likely from offshore somewhere? Meanwhile, I see the "Steiner" family name down below in the write up ..... maybe the same as the Steiner tractor parts outfit? Here ya go ......
"The Steiner family has always been about the business of making life simpler through practical engineering, design ingenuity and good old-fashioned common sense. Those early values passed on by their father, Marvin Steiner continues to be the driving force that pushes them to design and manufacture the highest quality equipment available, surpassing the needs of our ever-changing world. For over 20 years, Ventrac tractors and attachments have been built in Ohio, right here in the same community where we started out. Venture Products is a family owned company and has been that way since the very beginning. Before Ventrac came along, the founding family spent almost 25 years building agricultural equipment and other compact tractors. This laid the groundwork for the launch of the Ventrac brand in 1996 with the very first Ventrac 4000 series articulated tractor launched shortly after in 1998".
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
