At DC or low frequency AC, current flows throughout the conductor, so actually you have more surface area (for a given cable diameter) with solid wire than stranded wire for a conduction path. As frequency increases, and we are talking about up in the HF, VHF, UHF, and beyond, current flows on the surface...path of least of resistance. That's why "Waveguides" are effective for microwave frequencies; very low loss, high surface area, signal totally encapsulated.
I had a 4230 with batteries on either side and daisy chained together for 24V, mother deere OEM. Slow starter in the winter. Got tired of that so I made some changes.
I mounted new 12v, size 31 (⅜" studded size 27s) OTR truck batteries, very reasonably priced as the OTR dealer bought batteries by the pallet, 960 CCA each on either side as was the OEM positioning and ran parallel 2/0 stranded wire across connecting the batteries in parallel.....which the OEM truck dealer made up for me at a reasonable price; same wire used on OTR trucks.
From the battery adjacent to the starter, I ran (as short as possible) the + 2/0 to the solenoid input and the - 2/0 mounted under a starter bolt, with the connection nice and shiny and tight such that the lead was in contact with the mounting flange of the starter. This made the lowest conduction path for the least starting current resistance.
I don't need to tell you what a difference it made. All I had to do was be near the tractor and just "think" about starting it and she lit right off on her own......well not exactly, but you get the idea. Grin!
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.