Posted by 2510Paul on December 25, 2017 at 07:33:36 from (72.160.248.6):
Good Morning and Merry Christmas to all of you and thanks for your help through out the year.
I am posting about paint on this forum to get a broad coverage to my question, no pun intended, just turned out that way.
In the picture are my painting supplies. My results are not consistent so I will describe what I have been doing and ask for comments.
I turn the heat up to about 65 degrees in my shed and it is usually dry in there, even in the summer as I run de-humidifiers. All my painting is with spray cans of Enamel.
1. I use white rags and PPG cleaner, wax and oil cleaner, to get ready for primer. This seems to work well.
2a. I had used the JD Yellow Primer exclusively under the JD Topcoat but it does not seem to dry well under the JD Topcoat. I end up with a firm Topcoat and a soft Undercoat. Maybe I don't let the JD Yellow Primer dry long enough or I put it on too thick. I did use it on a 4020 engine once with a JD Topcoat and after two years it looks good. As I recall I let it dry much longer. I don't think I sanded in between. I normally don't sand in-between under and top coat.
2b. Lately I have been using the Rust-oleum Rust Reformer as a base or primer coat. I like the way it goes on, thinner, and am confident it is dealing with any rust in the pores of the metal. I have used the JD Topcoat with varying results. If I don't wait too long I think it works OK but the jury is out yet on that. I waited several days on a step kit before I put the JD Topcoat on, it did not seem to adhere as well. I put a step rail on one cold day, I got a couple flecks of green come off the black when I scratched it.
On yet another project I used the Rust-oleum Green Topcoat as recommended on the Rust Reformer can. It was thinner and seemed to adhere better although I did not let the Rust Reformer sit as long before I top coated it. It turned out real good. The color seemed a touch darker. My son warns me about it turning blue like the Farm & Fleet paint. Any experience with this?
3. As mentioned above my Topcoats have been the JD Green from JD and the JD Green from Rust-oleum. Does anyone have any longer term experience with the Rust-oleum green in sunlight or otherwise?
4. My son likes like the Rust-oleum Premier Primer. I am going to try that.
I suspect most of my issue is I am not consistent on how long I wait to Topcoat. Does anyone else put the JD-JD Green over a Rust-oleum product.
Mr. A-Case Guy, your paints look good, what do you do?
I would appreciate any and all comments. Sorry it is a little long.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Day Mom Drove the 8N - by Brian Browning. My Dad was wanting to put in a garden but couldn't operate the 8N and handle the old horse drawn plow he had found and rigged up to use with the tractor. Well, he decided to go get Mom out of the house and have her drive the tractor while he walked behind the plow. You got to understand that while my Mom is a hard worker who will always help whenever she can... she had never operated farm machinery before that day. Dad got her out there, explained how the clutch was the same as in our o
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
