Posted by chas036 on December 03, 2017 at 08:49:48 from (74.74.100.46):
I have narrowed my choice to the following two tractors, but don't know which one too choose. They are both gas and well maintained tractors for $5000 for JD and $4000 for the Oliver. I will be using them for snow blowing in winter, and field work like bush hogging, plowing, disking, etc. in the summer.
I like the Oliver 1650 because is seems to be very easy tractor to work on without having to split it if I have to do clutch or brake work. But it is a "BIG Profile" tractor and with 6 cylinders, I can't imagine the fuel consumption.
The JD 2020 is more in size with what I am use to using. I have a JD 730 gas, JD 620, and JD-B) and being the 2020 is John Deere, I feel more comfortable about getting parts. But because you have to split it if you have to do brake work or clutch work, this scares me a little.
In general, which tractor is the best in overall quality and reliability with less problems?
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.